Air conditioning
Cooling and heating for homes, offices and commercial premises.
Domestic and commercial climate control
Your Temperature,
Under Control.
Professional air conditioning, heating and ventilation solutions for comfortable spaces throughout the year.
What we do
Complete climate control
Heating
Air-to-air heat-pump heating for year-round comfort.
Ventilation
Airflow solutions for fresher, better-managed spaces.
Maintenance
Planned care to support reliable system operation.
Air conditioning
Much more than just cooling
Many people associate air conditioning solely with cooling. In reality, modern systems can provide cooling, heat-pump heating, air circulation and year-round comfort.
Cooling when it matters
Correctly specified systems can help manage warm bedrooms, home offices, conservatories and commercial spaces.
Heating through colder months
In heating mode, a reverse-cycle system transfers heat from outside air and delivers warm air into the occupied room.
Room-by-room control
Selected rooms or zones can be controlled individually, helping to avoid conditioning unused spaces.
One system, year-round value
Subject to the selected equipment, one system can provide cooling, heating, air movement and filtration.
Read the full articleUseful starting point
Air conditioner size to room size
Correct sizing matters. This table is indicative guidance only and assumes typical room conditions.
| Room area | Typical use | Indicative capacity |
|---|---|---|
| Up to 15 m² | Small bedroom or study | 2.0 to 2.5 kW |
| 15 to 25 m² | Large bedroom or home office | 2.5 to 3.5 kW |
| 25 to 35 m² | Living room or similar | 3.5 to 5.0 kW |
| 35 to 50 m² | Large living area | 5.0 to 6.0 kW |
| 50 to 70 m² | Open-plan area | 6.0 to 7.1 kW |
| 70 to 100 m² | Large commercial area | 7.1 to 10.0 kW |
Professional survey recommended. Ceiling height, insulation, glazing, solar gain, orientation, occupancy and equipment all affect final selection.
Understanding the difference
Air conditioning vs gas and direct electric heating
Reverse-cycle air conditioning uses heat-pump technology to transfer heat rather than generate all heat directly from purchased energy.
Air-to-air heat pump
Transfers heat and can deliver multiple units of heat for each unit of electricity used.
Direct electric heater
Converts electricity into heat at the point of use but does not multiply the purchased energy through heat transfer.
Gas boiler
Burns fuel to heat water for a wet central-heating system, with some losses through combustion and distribution.
The Energy Saving Trust states that heat pumps can produce three units of heat for each unit of electricity used and are more efficient than gas boilers and electric radiators.
Energy Saving Trust heat-pump guidanceEfficiency does not guarantee lower bills. Costs depend on tariffs, seasonal performance, heat demand, controls, building fabric and system sizing.
Service coverage
Areas we cover
Based in Corby, TotalTemp Control Ltd supports domestic and commercial customers across Northamptonshire and surrounding areas.
CorbyKetteringNorthamptonWellingboroughMarket HarboroughPeterboroughLeicesterRugbyMilton KeynesBedfordCambridgeStamford
Coverage depends on the type and scale of work. Please enquire if your location is not listed.
Based in Corby • Serving surrounding areas
Make an enquiry
Let’s discuss your requirements.
Complete the form or contact Gordon directly.
07983 646760enquiries@totaltempcontrol.co.uk